300 Series Stainless Steel Shafting Class L

 

  • 304 Stainless Steel Shafting
  • Excellent Corrosion/Chemical Resistance
  • Excellent for Washdown Applications
  • Excellent in Combination with LM76's Minuteman™
    PTFE Composite Bearings and Minuteman™FDA/USDA Complaint Linear Bearings
  • Cut-off and Random Lengths
  • Machined-to-Print Specials

    1-800-513-3163     413-525-4166     
    Fax: 413-525-3735  
PART
NUMBER
Nominal
Shaft
Diameter

Diameter Tolerances
Class L

Min                Max
 

Max. Length
in Feet
S300-4-xx 1/4"            0.2490          0.2495 12
S300-6-xx 3/8"            0.3740          0.3745 12
S300-8-xx 1/2"            0.4990          0.4995 12
S300-10-xx 5/8"            0.6240          0.6245 12
S300-12-xx 3/4"            0.7490          0.7495 12
S300-16-xx 1"            0.9990          0.9995 12
S300-20-xx 1-1/4"            1.2490          1.2495 12
S300-24-xx 1-1/2"            1.4989          1.4994 12
S300-32-xx 2            1.9987          1.9994 12

NOTE: Specify length in part number   Example: S300-4-20"  

NOTE: The difference between 303, 304 and 316 Stainless is the % of Nickel and Chromium in the alloy - a  
higher number = a greater percentage. Although 303 offers the best machine-ability, 304 is more corrosion resistant
and wear resistant - a better bearing grade. 316 offers the best corrosion resistance in this family ( marine grade ss ),
is harder and is also a good match for our Minuteman/FDA/USDA Complaint Self Lubricating Linear Bearings. Because of cost
and available off-the-shelf inventory, LM76 recommends 304.