RC60 STEEL SHAFTING

  • Standard Hardened RC60 Steel Shafting
  • Ground & Polished to Class L Tolerances
  • Available in Both Cut-off Lengths & Random Lengths
  • Excellent in combination with all Minuteman™
    Linear Motion bearings:
    Minuteman™ Self Lubricating
    Minuteman™ FDA/USDA Compliant
    Minuteman™ Ceramic Coated

  • Machined-to-Print Specials

    1-800-513-3163   413-525-4166  
    Fax: 413-525-3735

Shaft Straightness      0.001/0.002 in/ft. cumulative
Shaft Type                 RC 1060 Steel
Shaft Roundness        0.000080 inches
Surface Finish            8-12
Ra microinch      
PART
NUMBER
Nominal
Shaft
Diameter

Diameter Tolerances
Class L
Min                Max
 

Max. Length
in Feet
 Weight Per Inch
in Lbs.
LMRC-4-xx 1/4" 0.2490              0.2495 12 0.014
LMRC-6-xx 3/8" 0.3740              0.3745 12 0.031
LMRC-8-xx 1/2" 0.4990              0.4995 12 0.055
LMRC-10-xx 5/8" 0.6240              0.6245 12 0.086
LMRC-12-xx 3/4" 0.7490              0.7495 12 0.125
LMRC-16-xx 1" 0.9990              0.9995 12 0.222
LMRC-20-xx 1-1/4" 1.2490              1.2495 12 0.348
LMRC-24-xx 1-1/2" 1.4989              1.4994 12 0.500
LMRC-32-xx 2 1.9987              1.9994 12 0.890

LMRC-40-xx

2-1/2" 2.4985              2.4993 12 1.391
LMRC-48-xx 3" 2.9983              2.9992 12 2.003
LMRC-64-xx 4" 3.9976              3.9988 12 3.560

NOTE: Specify length in part number   Example: LMRC-4-20"