The "original" drop-in replacement for linear ball
bearings in 1976. The Ceramic Coated Linear Bearings
feature a file hard, RC89 coating over an aluminum
substrate. This bearing requires lubrication, light
oil is sufficient, and has
broken all test records for linear feet of travel:
100 million!
Open and Closed Bearings
Nominal bearing sizes ranging from 1/4" up
to 4". Open and closed styles
with self aligning feature available (SA).
Inch Closed/Single Pillow
Blocks
Nominal bearing sizes ranging from 1/4" up
to 2". Closed styles with self aligning
feature available (SA).
Inch Open/Single Pillow
Blocks
Nominal bearing sizes ranging from 1/4" up
to 2". Open styles with self aligning
feature available (SA).
Inch Closed/Twin Pillow
Blocks
Nominal bearing sizes ranging from 1/4" up
to 2". Closed styles with self aligning
feature available (SA).
Inch Open/Twin Pillow
Blocks
Nominal bearing sizes ranging from 1/4" up
to 2". Open styles with self aligning
feature available (SA).
Flange Blocks
Nominal bearing sizes ranging from 3/8" up
to 1-1/4". Self aligning feature available
(SA).
Ceramic TWM Bearings
Nominal metric bearing sizes ranging from
6mm up to 50mm. Also available with a white
PTFE FDA/USGA compliant liner and a ceramic
coated shell.
Ceramic Coated Linear Bearings thrive in
applications where the following situations
are present:
•
Simultaneous linear, oscillating and rotary
motion in 1 bearing High Load Capacity -
10x's more than comparable linear ball
bearing
•
Lowest coefficient of friction of any ball
bushing replacement
•
Works where others fail: glass, granite,
chemicals, heat & shock!
•
Quiet running
•
Very competitively priced against all ball
bushing products
•
Available in all standard inch & metric
linear ball bearing size
•
Ceramic Coating does not chip, flake or
crack upon impact, shock or vibration
NOTE: LM Ceramic Coated Linear Bearings
require lubrication: light oil or grease. NO
SILICON BASED LUBRICANTS
